Page 205 - KHovanian Homes - Pathway to Homeownership

Section 13 | Standard of Performance MASONRY Condition Above grade cracks in masonry or veneer walls Efflorescence is present on the surface of masonry or mortor ROUGH CARPENTRY Condition Subfloor or stair squeaks or appear to be loose Your Responsibility 1. Please note we are not responsible for matching colors of old and new materials. Our Responsibility 1. Cracks more than 1/4" wide in mortar joints in masonry walls will be repaired (1 year). 1. This condition in not covered by this limited warranty. Our Responsibility 1. This condition is not covered by this limited warranty. An exposed concrete wall has pits, surface voids, or similar imperfections in it. 1. Contractor will repair imperfections that are 1" in diameter or depth, using a material designed to fill holes in concrete (1 year). A Cold joint is visible on exposed poured concrete foundation walls 1. The contractor will cosmetically repair any cold joint greater than 1/4", using a material designed to fill cracks in concrete. Your Responsibility 1. Please note that a squeak-proof floor or stairs is not guaranteed. Uneven wood floors 1. Any floor with more than 1/4" ridge or depression within any 32" measurement when measured in any direction to the joists will be repaired (1 year). Bowed walls or other interior surfaces 1. Any wall that bows more than 1/2" out of line within any 32" horizontal or vertical measurement taken at least 16" from any sheetrock corner or opening will be repaired (1 year). Out-of-plumb walls Springiness, bounce, shaking or visible sag is present in the floor system. Joints of roof sheating are visible through shingles 1. Please note that deflection in a wood floor system is normal. 1. Any walls that are more than 1/4" out of plumb for any 32" vertical measurement will be repaired (1 year). 1. This condition is not covered by this limited warranty. 1. This condition may occur during certain sunlight and is not covered under this limited warranty. Roof trusses have lifted from the adjoining interior walls 1. Defection is a normal condition that is considered a part of the engineered design of the roof trusses. 1. This condition is not covered by this limited warranty. 158 | Edition July 2019